Jordan
Bahrain Egypt Saudi Arabia UAE
EN
EN
Contact news and events About us Home
PRODUCT RANGE
SYSTEM
Selector REFERENCES DOWNLOAD SECTION
Primers and Ancillary
Vetonit PAB100

Saveto plaster accessories  - plaster architrave beads

 

Uses
Architrave Feature Bead is used to form a decorative shadow line at plaster edge, at door and window reveals and other joinery features.
It can also be used to act as a neat divide between differing wall finishes.
Fast Download
Technical Data Sheet
download (*.pdf 0.64Mb)
Technical Information
Product Description

Vetonit PAB100  is a pre-galvanized steel protector architrave beads designed to act as a plaster stop profile whilst creating a shadow like recess around door frames, ceiling and varying wall finishes.

Vetonit PAB100 will increase the speed of installation and finishing process dramatically.       

Advantages
  • Easy to apply.
  • High impact resistance.
  • Reduces the time taken in plaster finishing process.
Compiliance Standard

ACI: 524R-08 (Building Code Requirements for Masonry Structures).

 

Packaging & Coverage

Vetonit PAB100

Width (mm)

Length (m) 

QTY/Box

Vetonit PAB133

13

3

50

Vetonit PAB163

16

3

50

Vetonit PAB193

19

3

50
Application Information
Instructions for use

Application

Fix Vetonit PAB100 by using Premix Plaster S, Vetonit Render, or any suitable mechanical fixing at a maximum center spaces of 600mm.

Vetonit PAB100 may be wire tied to the face of metal lathing backgrounds. Use tinsnips or shears to cut angle beads to the desired size.

When jointing architrave  beads use a dowel inserted in the nose to ensure continuity and alignment.

To get a sharp neat corner finish, avoid damaging the  beads when troweling plaster or render.

Additional Information
Important note

Saveto endeavors to ensure that any advice, recommendations, information it may give, is accurate and correct. It cannot accept any liability either directly or indirectly arising from the use of its products, because it has no direct or continuous control over where or how its products are applied, whether or not in accordance with any advice, specification, recommendation or information given by us. Saveto has the right to change any of the specifications mentioned in the Technical data sheets upon its discretion without prior notification.

Hard copies of TDSs are printed once or twice a year, while our technical data sheets are continuously being updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.

More Products from this section
Ready Mix Bond

Multi-purpose bonding agent & admixture

Saveto Bond 2

Multipurpose low viscosity bonding agent & admixture

Saveto PP Fiber

High Quality Monofilament Polypropylene Fibers

Vetobond PB436

Polymeric soil stabilizer

Vetobond PB434

Polymeric bonding agent, waterproof mix enhancer & primer

view more
Featured Product
Porcelain TILE FIX

Polymer modified weather resistant adhesive for porcelain tiles.

 

Uses
Specially designed for porcelain tiles
Suitable for non-absorbent tiles including large tiles
Tiling on smooth concrete surfaces, lightweight bricks, blocks, plaster boards.
Tiling on wall surfaces that are plastered with water resistant plasters such as Vetonit Render & Vetonit Base WR on damp concrete interiors.
Suitable for dry & wet conditions.
Tiling on cement and gypsum Boards.
Contact us
Choose a country
Saudi Vetonit Co. Ltd. (SAVETO)
P.O. Box 52235 Riyadh 11563, KSA
Toll: (+966 11) 265 3334
Fax: (+966 11) 265 0936
Sales
800 124 9009
Fax: (+966 11) 265 0718
Email: sales@saveto.com
Site Map
Home
About us
news and events
Contact
DOWNLOAD SECTION
REFERENCES
Copyright ©2015-2016 Saudi Vetonit Co. Ltd. All Rights Reserved.