Primers and Ancillary
Vetoprime EP190

Versatile water based penetrating epoxy primer .

As a universal versatile primer for water based resinous flooring and concrete repair systems.
Sealing of semi-porous cementitious substrates.
Fast Download
Technical Data Sheet
download (*.pdf 0.15Mb)
Technical Information
Product Description

Vetoprime EP190 is a universal primer for the water-based Vetorep and Vetotop product range, its applied on prepared concrete and cementitious substrates to seal the substrate and enhance bonding with top coats. The product can be used as a stand alone product in internal applications as a seal coat to harden cementitious surfaces and prevent dusting. Vetoprime EP190 is a three component water based epoxy resin that has penetrating properties making it ideal for concrete substrates.


Easily applied by brush, roller or spray.

Versatile with applications in a large number of coating materials and sealants.

Deep  penetration,  designed  for  semi  porous surfaces.

Large application temperature range (6 to 500C)

High wetting properties.

Damp tolerant.

Cost effective, suitable for use in MENA region conditions.

Packaging & Coverage

Vetoprime EP190 is supplied 4 & 15 Liter kits, coverage: 7 - 10 m2 /Liter


Shelf Life & Storage

Original sealed container of Vetoprime EP190 has a shelf life of 12 months provided it is stored clear of ground in a dry shaded place below 35ºC.

Shelf life & Storage

Original sealed container of Vetoprime EP190 has a shelf life of 12 months provided it is stored clear of ground in a dry shaded place below 35ºC.

Application Information
Instructions for use

Usage Instructions


It is essential that Vetoprime EP190 is applied to a sound, clean and dry surface in order to achieve maximum bond strength between substrate and coating/repair products.


Concrete Substrates


Should be at least 28 days old and relative humidity of the concrete is 85% or below. Laitence deposits on new concrete are best removed by light grit blasting, mechanical scabbling or grinding.

 Where heavy contamination by oil and grease has occurred or existing coatings are present, it is essential that all contaminations are removed.




Mix Vetoprime EP190 as supplied. Add the entire content of hardener can to the base can and mix thoroughly for about 2 minutes, then add the third catalyst reducer part slowly and mix for 4 minutes. Once mixed, the Vetoprime EP190 shall be immediately applied in a thin continuous film using stiff brushes or rollers. Avoid over-application and puddles.

 Vetoprime EP190 shall be allowed to become tack- free prior to the application of epoxy coating (unless otherwise specified) but well within the open time specified for the given temperature.

 The hotter the substrate, the more quickly the primer will become dry.




All tools and equipment shall be cleaned immediately after use with water.

Additional Information
Health & Sefety

Some people are sensitive to epoxy resins; so gloves and a barrier cream shall be used when handling these products. If contact with the resin occurs, it must be removed, before if hardens, with resin removing cream follow by washing with soap and water. Do not use solvent.

 During use, avoid contact with skin and eyes. Wear suitable protective clothing, gloves, eye protection and respiratory protective equipment. In case of contact with eye, rinse immediately with plenty of clean water and seek medical advice. If swallowed, seek medical attention immediately – do not induce vomiting.

 Vetoprime EP190 is nonflammable.

Important note

Saveto manufactures a wide range of construction chemicals and specialty products for various applications divided into the following product groups:

Concrete Repair, Grouts and Enhancement.

Wall & Facade Systems.

Flooring and Coating Systems.

Sealants and Joints.

Plasters & Renders.

Putties & Finishes.

Tiling Systems


Primers & Ancillary Products.

Specialty Products.

Saveto also provides various technical information such as CAD details, detailed method statements, specification clauses, application manuals, product selectors and technical support both in contractors and consultants offices as well as construction sites.

More Products from this section
Ready Mix Bond

Multi-purpose bonding agent & admixture

Saveto PP Fiber

High Quality Monofilament Polypropylene Fibers

Vetobond PB436

Polymeric soil stabilizer

Vetobond PB434

Polymeric bonding agent, waterproof mix enhancer & primer

Vetobond PB433

Versatile resin adhesive, cement modifier, bonding agent & sealer

view more
Featured Product
Vetonit Bond 2

Multipurpose low viscosity bonding agent & admixture

Works as admixture with plaster, lime/sand cement screeds, renders, mortars and cement grouts when diluted 1:2 with potable water.
Works as bonding agent and can be sprayed or brushed on green substrates to improve bonding of plasters, patching compounds. Renders, mortars, joint tape fixing etc. when diluted 2:1 with potable water.
Can be used for both internal and external applications.
Contact us
Choose a country
Saudi Vetonit Co. Ltd. (SAVETO)
P.O. Box 52235 Riyadh 11563, KSA
Toll: (+966 11) 265 3334
Fax: (+966 11) 265 0936
800 124 9009
Fax: (+966 11) 265 0718
Site Map