Flooring & Coatings Systems
Vetodeck UD

Polyurethane based heavy duty, waterproof and UV resistant car park decking system

Heavily trafficked areas
Car park decks, car park ramps
Turning areas, entrances, and thoroughfares.
On new and existing floor.
Fast Download
Technical Data Sheet
download (*.pdf 0.58Mb)
Technical Information
Product Description

Vetodeck UD is a multi-layer deck protection system comprising a primer, waterproof membrane and protective top coat. All components are applied in the liquid phase and react chemically to form a tough, flexible, protective surface. Vetodeck AD system is designed to provide an added level of protection to, new and existing, heavily trafficked areas.

  • Flexible and tear resistant.
  • Multi purpose.
  • Seamless and watertight.
  • Rapid application, reliable and safe.
  • Available in a range of standard colours.
  • UV resistant.
  • Weather resistant.
  • Suitable for internal and external applications.
Compliance Standard
  • ASTM D412
  • ASTM D624
  • ASTM C1305
Packaging & Coverage

Vetodeck Components are supplied in:

Vetoprime EP490 is supplied in 4 & 15 liters Kit, Coverage: 7 - 10 m2  /Liter

Vetotop UC 363 is supplied in 4 & 15 liters Kit, Coverage: 1.25 m2  /Liter

Vetotop UC370 is supplied in 4 & 15 liters Kit, Coverage: 6 m2  /Liter

Vetotop UC373 is supplied in 1 & 4 liters Kit, Coverage: 70LM x 10cm / Liter

Shelf Life & Storage

Original sealed bags of Vetodeck UD components has a shelf life of 12 months provided it is stored clear of ground in a dry and shaded place below 35ºC.

Application Information
Instructions for use

Apply Vetoprime EP490 to the prepared surface at a wet film thickness of 100 microns.


Apply Vetotop UC363 to Vetoprime EP490 surface at a wet film thickness of 750 - 900 microns. For best results Vetotop UC363 should be applied with a notched trowel or squeegee. If Vetotop UC363 is still wet, seed with Saveto Vetograin - Grain No. 2 at a rate of 0.5kg/m2 and allow to cure for 16 hours at 25ºC.

Top Coat:
Apply Vetotop UC370 top coat to the membrane coat at a wet film thickness of 300 microns. When application is complete the system should be permitted to cure for 72 hours @ 35°C or 7 days @ 25°C prior to being trafficked.

Line Marking:
Apply Vetotop UC373 as a line marking paint. Vetotop UC373 is available in a range of traffice RAL colors.

All tools and equipment should be cleaned immediately after use with Vetonit Solvent.

Surface Preparation

Existing surfaces should be sound, clean, free from loose material, grease, laitance, dirt curing compound, etc.
Laitance and weak surface layer shall be removed using mechanical methods such as grinding or blasting in order to provide a sound well profiled surface. All necessary repairs should be made prior to application by using the same material. New concrete floors shall be at least 5 days old and visibly dry with no standing water on top.
New concrete surfaces should have reached 80% of their intended physical properties - generally only achieved after a minimum curing period of 28 days. Existing concrete sur-
faces must be prepared to provide a clean, sound substrate

Additional Information
Health & Safety

Vetodeck UD Components should not come into contact with skin and eyes or be swallowed. Avoid inhalation of vapour and spray. Use only in well ventilated areas. In case of insufficient ventilation wear suitable respiratory protection. Wear suitable protective clothing, gloves and eye/face protection. Barrier creams provide additional skin protection.
Should accidental skin contact occur, remove immediately with a suitable skin cleanser followed by washing with soap and water.In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.If swallowed, seek medical attention immediately - do not induce vomiting.
Refer to product MSDS for further information.

Important note

Saveto endeavors to ensure that any advice, recommendations, information it may give, is accurate and correct. It cannot accept any liability either directly or indirectly arising from the use of its products, because it has no direct or continuous control over where or how its products are applied, whether or not in accordance with any advice, specification, recommendation or information given by us. Saveto has the right to change any of the specifications mentioned in the Technical data sheets upon its discretion without prior notification.

Hard copies of TDSs are printed once or twice a year, while our technical data sheets are continuously being updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.

More Products from this section
Vetotop CL530

Premixed 2 to 10 mm thick cementitious self leveling underlayment

Vetotop CS535

Premixed 10 to 30 mm thick cementitious screed.

Vetotop CS536

Premixed 30 to 100 mm thick cementitious screed.

Vetotop EC198

Water Based chemical & abrasion resistant anti bacterial wall & floor thin epoxy coating

Vetotop EC493

Solvent based high performance, self priming, thin epoxy topping

view more
Featured Product
Vetotop UC371

High performance, chemical, scratch & UV resistant polyester polyurethane floor & wall coating

Long term protection of car parks and floors in factories, warehouses, laboratories, loading decks ramps, swimming pools, showers, kitchens, dairies, breweries.
UV Resistant top coat over flooring systems including concrete, epoxies, aromatic elastic polyurethanes,...etc.
Can be applied to floors, walls and ceilings.
Contact us
Choose a country
Saudi Vetonit Co. Ltd. (SAVETO)
P.O. Box 52235 Riyadh 11563, KSA
Toll: (+966 11) 265 3334
Fax: (+966 11) 265 0936
800 124 9009
Fax: (+966 11) 265 0718
Email: sales@saveto.com
Site Map