Jordan
Bahrain Egypt Saudi Arabia UAE
EN
EN
Contact news and events About us Home
PRODUCT RANGE
SYSTEM
Selector REFERENCES DOWNLOAD SECTION
Primers and Ancillary
Vetonit PBL

Saveto block reinforcement access-ories ladder type

 

Uses
As vertical bars to reinforce masonry block works
Reinforces block walls against wind effect.
Withstand the loading of material against the wall.
Fast Download
Technical Data Sheet
download (*.pdf 0.34Mb)
Technical Information
Product Description

Vetonit PBL ladder is a galvanised steel cross rods manufactured with mason productivity and proper wall construction in mind. Cross rods are spaced so block cells are not obstructed, allowing easy placement of vertical rebars. Vetonit PBL increases the performance of masonry walls under various stresses.

 

Advantages
  • Easy to apply.
  • Highly effectinve in reducing cracks that can arise from thermal stresses.
  • Enhances resistance to water penetration, as cracks are controlled.
  • Increase lateral flexural strength.
  • Increase elasticity.
  • Increase performance of masonry walls under various stresses.
  • Fabricated on conformance with ASCE/ACI 520 Building code requirements for masonry structures and ASTM A 951 (Standard specification of masonry joint reinforcement).
Compliance Standard
  • ASTM A951 
  • ACI / ASCE 530 (Building Code Requirements for Masonry Structures).
Packaging & Coverage

Vetonit PBL

Width (mm) 

Length (m) 

Vetonit PBL053

50

3

Vetonit PBL103

103

3

Vetonit PBL153

153

3

Vetonit PBL203

203

3
Application Information
Additional Information
Important note

Saveto endeavors to ensure that any advice, recommendations, information it may give, is accurate and correct. It cannot accept any liability either directly or indirectly arising from the use of its products, because it has no direct or continuous control over where or how its products are applied, whether or not in accordance with any advice, specification, recommendation or information given by us. Saveto has the right to change any of the specifications mentioned in the Technical data sheets upon its discretion without prior notification.

Hard copies of TDSs are printed once or twice a year, while our technical data sheets are continuously being updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.

More Products from this section
Ready Mix Bond

Multi-purpose bonding agent & admixture

Saveto Bond 2

Multipurpose low viscosity bonding agent & admixture

Vetobond PB436

Polymeric soil stabilizer

Vetobond PB434

Polymeric bonding agent, waterproof mix enhancer & primer

Vetobond PB433

Versatile resin adhesive, cement modifier, bonding agent & sealer

view more
Featured Product
Vetoproof CM740

Single component elastomeric crack-bridging cementitious waterproof membrane

Uses
Waterproof lining for swimming pools, water tanks, dams, canals, etc.
Wet-areas waterproofing while receiving tile adhesives and other renders.
Protecting concrete and masonry structures against ingress of chloride ions and carbonation.
As a crack isolation membrane in tile fixing assemblies.
Contact us
Choose a country
Saudi Vetonit Co. Ltd. (SAVETO)
P.O. Box 52235 Riyadh 11563, KSA
Toll: (+966 11) 265 3334
Fax: (+966 11) 265 0936
Sales
800 124 9009
Fax: (+966 11) 265 0718
Email: sales@saveto.com
Site Map
Home
About us
news and events
Contact
DOWNLOAD SECTION
REFERENCES
Copyright ©2015-2016 Saudi Vetonit Co. Ltd. All Rights Reserved.