Primers and Ancillary
Vetonit Solvent XX600

Resin cleaning & thinning solvent

Clean equipment and tools after use or mixing of epoxy and urethane based resins.
Thinning specific epoxy EC698.
Fast Download
Technical Data Sheet
download (*.pdf 0.21Mb)
Technical Information
Product Description

Vetonit Solvent XX600 is a specially developed solvent blend for use with Vetotop EC698.

Packaging & Coverage

Vetonit Solvent is supplied in 5 Liter cans, 20 Liter pails.

Shelf Life & Storage

Original sealed pack of Vetonit Solvent XX600 has a shelf life of 12 months provided it is stored clear of ground in a dry and shaded place below 25ºC.

Pale Liquid
Application Information
Instructions for use

For cleaning tools, it is best to pour some Vetonit Solvent XX600 into a container and to clean the implements within this container.

For cleaning substrates, the solvent can be poured directly, or applied by cloth or paper.

For thinning application of Saveto products, please refer to product data sheet for thinner ratio to original material or refer to  local Saveto office for information. For other products strictly follow the product thinning ratios mentioned in technical datasheet.

Additional Information
Health & Safety

Vetonit Solvent XX600 is an industrial grade solvent that should not come into contact with skin and eyes or be swallowed. Avoid inhalation of vapor and spray. Use only in well ventilated areas. In case of insufficient ventilation wear suitable respiratory protection. Wear suitable protective clothing, gloves and eye/face protection. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If swallowed, seek medical attention immediately - do not induce vomiting. 

No smoking or naked flames.

Refer to Material Safety Data Sheet for further information.

Important note

Saveto endeavors to ensure that any advice, recommendations, information it may give, is accurate and correct. It cannot accept any liability either directly or indirectly arising from the use of its products, because it has no direct or continuous control over where or how its products are applied, whether or not in accordance with any advice, specification, recommendation or information given by us. Saveto has the right to change any of the specifications mentioned in the Technical data sheets upon its discretion without prior notification.

Hard copies of TDSs are printed once or twice a year, while our technical data sheets are continuously being updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.

More Products from this section
Ready Mix Bond

Multi-purpose bonding agent & admixture

Saveto Bond 2

Multipurpose low viscosity bonding agent & admixture

Saveto PP Fiber

High Quality Monofilament Polypropylene Fibers

Vetobond PB436

Polymeric soil stabilizer

Vetobond PB434

Polymeric bonding agent, waterproof mix enhancer & primer

view more
Featured Product
Vetonit Render

Water Resistant Patch & Repair Premixed Render

Internal & external plaster on block walls and rough surfaces.
Applied on both vertical and over-head surfaces
On concrete surfaces that are smooth and also precast concrete surfaces without scratch coat applied first.
Plastering to a thickness of 10 mm in a single application.
Contact us
Choose a country
Saudi Vetonit Co. Ltd. (SAVETO)
P.O. Box 52235 Riyadh 11563, KSA
Toll: (+966 11) 265 3334
Fax: (+966 11) 265 0936
800 124 9009
Fax: (+966 11) 265 0718
Site Map